Dodge Avenger Wheel Bolt Pattern, Rim Size, Hub Bore, Offsets, and Tire Size
Introduction
Always a star in the Dodge family, the Dodge Avenger was a brand bearing two distinct personalities over its lifetime. From its fast coupe days in the 1990s to its change into a practical but aggressive-looking sedan in the late 2000s, the Avenger has a devoted following that loves to give these vehicles a more tailored touch. And securing the right wheel fitment is one of the first steps toward customizing your Avenger.
Not only does proper wheel fitment affect appearance; it also preserves performance, safety, and even ride comfort of your vehicle. The correct wheel and tire combination guarantees correct braking clearance, maintains accuracy of your speedometer, and avoids any unwelcome rubbing or steering problems.
This handbook is meant to lead you through the proper Dodge Avenger specs and choices for both versions. Whether you're restoring a first-generation coupe or improving the appearance of a second-generation sedan, we will dissect the basics—wheel bolt pattern, rim size, hub bore, offsets, and tire size—so you can make educated judgments. Although the Avenger might have dropped off the production line, its aggressive attitude on the road lives on through clever fitment decisions.
Understanding Wheel Fitment Basics
When we discuss wheel fitment, technical language can often overwhelm us, but breaking it down simplifies things. Consider your wheel like a puzzle piece; it must exactly fit your vehicle to run as it should. Many important factors define that fitfulness.
The bolt pattern is the circumference of the circle that the lug holes produce and their count. It's a 5-lug arrangement on a 114.3mm circle (5x114.3 mm) for both Dodge Avenger versions.
Rim size combines wheel width and diameter. A simple measurement in inches, the diameter affects tire height and general appearance. The width of a tire determines how wide you can fit, also expressed in inches.
Offset determines how far the wheel sticks out or tucks in by telling you how far the mounting surface is from the centerline. Depending on the year and trim, manufacturing offsets for the Avenger fall between +35mm and +45mm.
The hole in the middle of the wheel that fits over the hub of the car is called hub bore. Dodge Avengers have a 67.1mm hub bore; it is imperative to match this to prevent vibrations.
Finally, tire size goes beyond appearance. It influences ride quality, grip, and even gasoline mileage. Correct sidewall height guarantees accurate odometer and speedometer readings.
Dodge Journey Wheel Bolt Pattern, Rim Size, Hub Bore, Offsets, and Tire Size
First Generation Dodge Avenger (1995–2000)
Originally presented as a sporty mid-sized coupe, the first-generation Dodge Avenger kept specs that are still friendly for aftermarket wheel modifications of today between 1995 and 2000. To ensure for safe and secure installation, it uses a 5x114.3 mm bolt pattern and a 12x1.5 mm lug nut thread pitch—key specifications. Factory wheel diameters ranged from 15" to 17" with widths between 6" and 7". For the time, their dimensions offered a reasonable mix of handling and appearance. If you're upgrading, 17" or 18" rims with widths up to 8" provide the car a more aggressive stance while preserving driveability. Matching many other Chrysler and Mitsubishi platforms from the '90s, the OEM hub bore was 67.1mm. For correct clearance and flush installation, offset suggestions fall between +35mm and +42mm. Popular tire changes like 225/45R17 or 235/40R18 improve traction and look without affecting the speedometer. If you're fitting wheels with a bigger center bore, using hub-centric rings is highly recommended.
Second Generation Dodge Avenger (2008–2014)
Originally brought back in 2008, the second-generation Dodge Avenger maintained its sporty DNA while assuming the position of a mid-size sedan. For owners acquainted with Chrysler platforms, it maintained the 5x114.3mm bolt pattern and 12x1.5mm lug nut thread pitch, facilitating wheel upgrades. Usually measuring 17" in diameter, stock wheels came with 18" available on higher trims like the R/T. Although widths ranged from 6.5” to 7.5”, moving up to 8’s or 8.5” will modernize the appearance without sacrificing comfort. The hub bore stayed at 67.1mm; optimal offset ranges between +35mm and +42mm, maintaining the wheels neatly inside the fenders. Two good combinations of fuel economy and ride comfort were tire choices from the factory: 215/60R17 and 225/55R18. Many aficionados choose 245/45R18 or 245/40R20 for enhanced configurations to increase traction and a sportier footprint. Nevertheless, overly wide or low-profile tires might cause rubbing and severe rides; hence, appropriate measures and clearances should always be checked.
Wheel Fitment Comparison: First Gen vs. Second Gen Avenger
Although the first and second-generation Avengers have the identical bolt pattern (5x 114.3mm) and hub bore (67.1mm), that is where the similarities mainly stop. Because the sedans are taller, heavier, and have more wheel wells than the coupes, they can fit more wheel and tire combinations with fewer problems.
For example, the second-generation sedan can readily swallow 20" wheels while still maintaining a functional ride quality while 18" wheels are roughly as big as you would want to go on the first-generation coupe without considerable changes. The offset tastes also vary somewhat; the sedan's wider fenders give more wriggle room for aggressive positions.
Should you have a first-generation Avenger and be looking at second-generation wheels, they will bolt on but offsets may cause the wheels to sit further in, giving a tucked appearance. Here we apply cautious offset selection of spacers. As brake configurations also vary, always double-check caliper clearance when mixing generations.
Popular Aftermarket Wheels and Tire Brands for Dodge Avenger
Selecting premium wheel and tire brands is essential for your Avenger to have the correct street attitude. From mesh to concave designs, brands like American Racing, TSW, Azara, and Fuel Off-Road provide wheels that complement the Avenger's strong look. These brands also usually include the proper 5x114.3 bolt pattern and alternatives with a 67.1mm hub bore or bigger, which can be adjusted with rings.
Regarding tires, Michelin, Nitto, Falken, and Lexani Tires are robust contenders if you seek durability and performance. Perfect for daily driving Avengers that still want to make heads, they provide choices that balance grip, tread life, and riding comfort.
Although staggered configurations are rare for the Avenger, those seeking that distinctive appearance can pull it off on the sedan models with larger rears—just be ready to do your homework on offsets and suspension geometry.
Buy Dodge Avenger Wheels and Tires at Hulk Offsets
Your first choice for updating the wheels and tires on your Dodge Avenger is Hulk Offsets. Hulk Offsets makes it simple for Avenger owners to choose designs that complement their car's aggressive attitude as a committed aftermarket wheels and tire retailer. From traditional mesh designs to contemporary concave wheels, you will find choices that meet the Avenger's 5x114.3 bolt pattern, 67.1mm hub bore, and advised offsets, therefore guaranteeing a clean and correct fit every time.
Shopping from Hulk Offsets also provides the comfort of mind associated with assured fitment, thereby eliminating any guessing or dangerous purchases. Whether you use stock suspension or a lowered configuration, their expertise will help you choose the correct wheel width, diameter, and tire size for your particular generation, knowing the details inside and out of the Avenger.
Beyond wheels, Hulk Offsets also provides whole wheel and tire sets, enabling you to have everything mounted, balanced, and delivered straight to your house. They provide fitment galleries and professional advice to allow those seeking that flush or aggressive look see how your Avenger will look before you even place the purchase.
Conclusion
Although the Dodge Avenger might have dropped off the assembly line, its bold appearance and customizing possibilities still draw aficionados trying to make a statement. Getting the look and performance tuned in either the elegant coupe from the '90s or the aggressive sedan from the 2000s depends on knowing your wheel fitment.
Every element counts when selecting the ideal setup from the 5x114.3 bolt pattern and 67.1mm hub bore to the factory offsets and tire sizing. Go too aggressively and run the risk of rubbing or early suspension wear. Stay too conservative and you lose out on the handling and visual improvements a good wheel and tire combo may provide.
Hulk Offsets is here to provide a seamless and hassle-free approach when you're ready to elevate your Avenger. Knowing your car is in excellent hands will let you shop with confidence thanks to a large range of wheels and tires catered to your Avenger's requirements, plus fitment warranties and professional guidance.